The City of Detroit Energy and Water Benchmarking Ordinance, is a citywide energy benchmarking & disclosure program requiring owners of existing buildings to report energy and water use annually, using ENERGY STAR® Portfolio Manager®. Effective as of September 2023, this program provides building owners insight into their building’s energy efficiency and helps meet the City of Detroit’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER DETROIT BENCHMARKING?

Property Size

All buildings over 25,000 Sq. Ft.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building energy, water, and building use data. For example, in 2026, building owners must report 12 months of 2025 use data.

WHEN ARE DETROIT BENCHMARKING REPORTS DUE?

June 1, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Detroit does not currently have a BPS program.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires owners/managers of covered buildings to hire a third-party expert who will independently review and verify the building’s benchmarking data.

Detroit does not require data verification.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH DETROIT BENCHMARKING?

Failure to comply with Detroit’s Energy and Water Benchmarking Ordinance will lead to the issuance of a blight violation. Blight violations can result in a fine of up to $10,000.

HOW DO I COMPLY WITH DETROIT BENCHMARKING?

CONTACT US HERE to learn more and get started with compliance.

Detroit Energy and Water Benchmarking compliance can be confusing and hard to navigate. Bringing on a consultant like Green Econome streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START DETROIT BENCHMARKING COMPLIANCE?

Ordinances such as Detroit Energy and Water Benchmarking are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. Green Econome takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

GREEN ECONOME PROCESS

With every phase of the process, Green Econome’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

The City of Portland’s Commercial Building Energy Reporting Policy is a citywide energy benchmarking program requiring owners of existing buildings to report energy use annually, using ENERGY STAR® Portfolio Manager®. Effective as of April 2015, this program provides building owners insight into their building’s energy efficiency and helps meet the City of Portland’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER PORTLAND BENCHMARKING?

Property Size

Existing buildings 20,000 Sq. Ft. or larger.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building energy, and building use data. For example, in 2025, building owners must report 12 months of 2024 data.

WHEN ARE PORTLAND BENCHMARKING REPORTS DUE?

April 22, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Portland does not requires covered properties to meet building performance standards. However covered buildings do need to comply with Oregon State BEPS policy in addition to this requirement.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH PORTLAND BENCHMARKING?

Failure to comply with Portland’s Commercial Building Energy Reporting Policy will result in a $500 fine per building every 90 days until in compliance.

HOW DO I COMPLY WITH PORTLAND BENCHMARKING?

CONTACT US HERE to learn more and get started with compliance.

Portland Benchmarking compliance can be confusing and hard to navigate. Bringing on a consultant like VCA Green streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START PORTLAND BENCHMARKING COMPLIANCE?

Ordinances such as Portland Commercial Building Energy Reporting are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. VCA Green takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

PORTLAND BENCHMARKING RESOURCES

VCA GREEN PROCESS

With every phase of the process, VCA Green’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

The City of Seattle Building Emissions Performance Standard (BEPS), is a citywide energy benchmarking & improvement program requiring owners of existing buildings to report energy use annually, using ENERGY STAR® Portfolio Manager®. Effective as of 2023, this program provides building owners insight into their building’s energy efficiency and helps meet the City of Seattle’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER SEATTLE BENCHMARKING?

Property Size

Non-residential and multifamily buildings over 20,000 Sq. Ft.

Does not apply to buildings used for industrial manufacturing purposes.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building energy and building use data. For example, in 2025, building owners must report 12 months of 2024 data.

WHEN ARE SEATTLE BENCHMARKING REPORTS DUE?

June 1, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Seattle BEPS requires buildings to submit benchmarking data verification and GHG reports by October 1 between 2027 and 2030 depending on building size (see deadlines below).

Beginning in 2031, covered buildings will be required to meet Greenhouse Gas Intensity (GHGI) targets, verify their benchmarking data, and submit a GHG report every five years.

WHEN ARE SEATTLE BEPS REPORTS DUE?

Benchmarking Verification & GHG Report

October 1, 2027 – Buildings 90,001 Sq. Ft. and larger.

October 1, 2028 – Buildings between 50,000 and 90,000 Sq. Ft. or portfolios and campuses.

October 1, 2029 – Buildings between 30,000 and 50,000 Sq. Ft.

October 1, 2030 – Buildings between 20,001 and 30,000 Sq. Ft.

GHGI Target, Benchmarking Verification, & GHG Report

October 1, 2031 – Buildings 220,000 Sq. Ft. and larger.

October 1, 2032 – Buildings between 90,001 and 220,000 Sq. Ft.

October 1, 2033 – Buildings between 50,000 and 90,000 Sq. Ft. or portfolios and campuses.

October 1, 2034 – Buildings between 30,000 and 50,000 Sq. Ft.

October 1, 2035 – Buildings between 20,001 and 30,000 Sq. Ft.

Beginning in 2031, buildings must comply every 5 years following their first reporting deadline.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires owners/managers of covered buildings to hire a third-party expert who will independently review and verify the building’s benchmarking data.

Data verification is required at the intervals above.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH SEATTLE BEPS?

Failure to comply with Seattle BEPS will result in a base fine of $5,000 plus $1 per square foot per day while non-compliant. Penalties may accrue for up to 18 months.

HOW DO I COMPLY WITH SEATTLE BEPS?

CONTACT US HERE to learn more and get started with compliance.

Seattle BEPS compliance can be confusing and hard to navigate. Bringing on a consultant like VCA Green streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START SEATTLE BEPS COMPLIANCE?

Ordinances such as Seattle BEPS are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. VCA Green takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

SEATTLE BEPS

Climate Policy

One Seattle Climate Action Plan

Bill Text

SMC 22.925

Ordinance Homepage

Seattle BEPS

VCA GREEN PROCESS

With every phase of the process, VCA Green’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

The State of Oregon Building Energy Performance Standards (BEPS) is a statewide energy benchmarking & improvement program requiring owners of existing buildings to report energy use annually, using ENERGY STAR® Portfolio Manager®. Effective as of June 2023, this program provides building owners insight into their building’s energy efficiency and helps meet the State of Oregon’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER OREGON BEPS?

Tier 1 Building

Hotels, motels, and non-residential buildings 35,000 Sq. Ft. and larger.

Schools, university, agricultural, and energy-intensive buildings like hospitals not included.

Tier 2 Building

Multifamily residentials, hospitals, schools, and dormitories 35,000 Sq. Ft. or larger.

OR

Hotels, motels, and non-residential use buildings from 20,000 to 35,000 Sq. Ft.

WHAT INFORMATION IS REQUIRED FOR OREGON BEPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Under Oregon BEPS, both Tier 1 and Tier 2 buildings must complete the following before their compliance date:

  • Submit an application for the building.
  • Determine an Energy Use Intensity Target (EUIt) based on building type and operation.
  • Calculate the Energy Use Intensity (EUI) from 12 continuous months of data (benchmarking).

Tier 1 buildings must also implement the following:

  • Operations and Maintenance Programs (O&M).
  • Energy Management Plan (EMP).
  • Meet their EUIt.

Tier 1 buildings that do not expect to meet their energy target by their compliance date must take further action:

  • Report on their expected status 180 days before compliance date.
  • Perform an energy audit and life cycle cost assessment before their compliance date.
  • Implement cost-effective energy efficiency measures that reduce EUI.
  • Calculate and report on the building’s updated EUI as milestones are reached.

WHEN ARE OREGON BEPS REPORTS DUE?

Tier 1 BPS Due Date

June 1, 2028 – Non-residential, Hotel, or Motel over 200,000 Sq. Ft.

June 1, 2029 – Non-residential, Hotel, or Motel between 90,000 and 200,000 Sq. Ft.

June 1, 2030 – Non-residential, Hotel, or Motel between 35,000 and 90,000 Sq. Ft.

Tier 2 BPS Due Date

July 1, 2028 – All Tier 2 buildings

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH OREGON BPS?

Failure to comply with Oregon Building Performance Standards may result in a fine up to $5,000 plus one dollar per square foot every year while the violation continues. Failure to meet an EUIt will result in a $1,500 fine plus $0.20 per square foot per year.

* Fines only apply to Tier 1 buildings.

HOW DO I COMPLY WITH OREGON BPS?

CONTACT US HERE to learn more and get started with compliance.

Oregon State BPS compliance can be confusing and hard to navigate. Bringing on a consultant like VCA Green streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START OREGON BPS COMPLIANCE?

Ordinances such as Oregon State BPS are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. VCA Green takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

VCA GREEN PROCESS

With every phase of the process, VCA Green’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

Building Performance Colorado is a statewide energy benchmarking & disclosure program requiring owners of existing buildings to report energy use annually, using ENERGY STAR® Portfolio Manager®. Effective as of October 2023, this program provides building owners insight into their building’s energy efficiency and helps meet the State of Colorado’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER BUILDING PERFORMANCE COLORADO?

Property Size

All existing buildings 50,000 Sq. Ft. and above.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building energy and building use data. For example, in 2026, building owners must report 12 months of 2025 data.

WHEN ARE BUILDING PERFORMANCE COLORADO BENCHMARKING REPORTS DUE?

November 1, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Building Performance Colorado requires covered properties to meet BPS targets in 2026 and 2030. These targets can be achieved by completing one of the following compliance pathways:

  • Meet the site energy use intensity (EUI) targets set based on the building’s use type
  • Meet the greenhouse gas (GHG) emissions targets set based on the building’s use type
  • Achieve a site EUI reduction of 13% in 2026 and 29% in 2030 from its 2021 baseline EUI data
  • Achieve a GHG emissions reduction of 13% in 2026 and 29% in 2030 from its 2021 baseline GHG emissions data

Buildings owners were required to select their pathway by July 1, 2025. Pathway adjustment requests can be submitted up to December 31, 2026.

WHEN ARE BUILDING PERFORMANCE COLORADO BPS REPORTS DUE?

BPS Due Date

Covered buildings must achieve their building type’s target or emissions reduction percentage by 2026 and 2030. Building owners will demonstrate 2026 compliance through their benchmarking report due June 1, 2027, which reports the building’s energy use from January 1, 2026 to December 31, 2026.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires owners/managers of covered buildings to hire a certified third-party expert who will independently review and verify the building’s benchmarking data.

Under Building Performance Colorado, data verification is required when the building requests a compliance pathway adjustment.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH BUILDING PERFORMANCE COLORADO?

Violations of Building Performance Colorado’s benchmarking requirements will result in a $500 fine plus $2,000 per subsequent violation.

Failure to comply with Colorado’s BPS program will result in a $2,000 fine, plus $5,000 per subsequent violation.

HOW DO I COMPLY WITH BUILDING PERFORMANCE COLORADO?

CONTACT US HERE to learn more and get started with compliance.

We recognize that Building Performance Colorado compliance can be confusing and hard to navigate. Bringing on a consultant like VCA Green streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START BUILDING PERFORMANCE COLORADO COMPLIANCE?

Ordinances such as Building Performance Colorado are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. VCA Green takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

BUILDING PERFORMANCE COLORADO RESOURCES

VCA GREEN PROCESS

With every phase of the process, VCA Green’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

An essential strategy in the City of West Hollywood’s Climate Action and Adaptation Plan (CAAP), the West Hollywood Equitable Building Performance Standards (WeHo EBPS), is a citywide energy benchmarking & building performance standards (BPS) program. Effective as of December 2025, it requires owners of buildings over 20,000 Sq. Ft. to report energy use annually by May 15 using ENERGY STAR® Portfolio Manager®, and meet BPS targets every 4 years from 2028 to 2036.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER WEHO EBPS?

Property Size

All existing buildings over 20,000 Sq. Ft.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Starting in 2026, building owners are required to annually benchmark and report whole-building energy and building use data for the full calendar year. For example, in 2026, buildings owners must report 12 full calendar months of 2025 energy data.

Note that benchmarking data must also be third-party verified before submittal at the years specified (2026, 2028, 2032, 2036).

WHEN ARE WEHO EBPS BENCHMARKING REPORTS DUE?

May 15, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

WeHo EBPS requires building owners to meet performance targets by either (1) meeting energy performance targets by the deadline, or (2) submitting a Building Performance Action Plan (BPAP). These are measured using Site EUI (energy use intensity) or GHGI (greenhouse gas intensity).

BPAPs outline how the owner will improve energy efficiency, such as upgrading equipment or implementing other energy-saving measures, along with a timeline for completion. The city must approve these plans, and they must demonstrate measurable progress toward meeting the targets. After 2036, BPAPs will no longer be accepted, and buildings will be required to meet the final performance standard.

WHEN ARE WEHO EBPS BPS REPORTS DUE?

Covered properties under WeHo EBPS need to comply with building performance standards in the following years:

  • First Interim Performance Standard: May 15, 2028
    • Building Energy Use Period: January 1 – December 31, 2027
  • Second Interim Performance Standard: May 15, 2032
    • Building Energy Use Period: January 1 – December 31, 2031
  • Final Performance Standard: May 15, 2036
    • Building Energy Use Period: January 1 – December 31, 2035

Energy performance targets will get increasingly more stringent over time with each compliance deadline.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires owners/managers of covered buildings to hire a third-party expert to independently review and verify the building’s benchmarking data.

Under WeHo EBPS, data verification is required before submittal in 2026, 2028, 2032, and 2036.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH WEHO EBPS?

WeHo EBPS Benchmarking Penalty

Each instance where an owner of a covered property fails to meet annual reporting requirements can result in a fine up to $1,000.

WeHo EBPS Performance Standard Penalty

Buildings that fail to comply with performance standards and do not have an approved Building Performance Action Plan (BPAP) will be subject to fines equal to the Social Cost of Carbon for each unachieved GHG emission reduction.

The City’s Fee Resolution sets the exact amount fined per CO2e. Fines must be paid annually until the building is in compliance. Analysis from the California Air Resources Board projects values ranging from $63 to $93 per ton by 2025, under midrange scenarios.

WeHo EBPS Accuracy Penalty

Inaccurate reports or discrepancies of 50% or more between third-party verified data and the owner’s self-certified data will result in a fine of $1,000.

WeHo EBPS Overall Penalty

Owners of a covered property that violate annual benchmarking reporting, fail to meet interim and final performance standards, AND don’t have an approved BPAP will be fined $10 per square foot.

HOW DO I COMPLY WITH WEHO EBPS?

CONTACT US HERE to learn more and get started with compliance.

West Hollywood Equitable Building Performance Standards (EBPS) compliance can be confusing and hard to navigate. Bringing on a consultant like VCA Green streamlines the entire process while ensuring accurate reporting and providing third-party data verification.

We also provide a complimentary benchmarking and compliance roadmap consultation, where we’ll assess your building’s performance, highlight key metrics, and develop a clear and manageable compliance for your property with WeHo’s EBPS.

WHEN SHOULD I START WEHO EBPS COMPLIANCE?

Ordinances such as WeHo EBPS are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

It’s never too early to start planning for your energy performance targets! The sooner you begin, the easier and more cost-effective the journey will be. VCA Green makes compliance as smooth as possible by handling every step. From accurate data collection, verification and reporting to project management, let’s work together to create a tailored roadmap for you and your property! The earlier we get started, the more we can help you save, both in time and cost.

VCA GREEN PROCESS

With every phase of the process, VCA Green’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

California’s Climate Corporate Data Accountability Act (Senate Bill 253) is a statewide GHG emissions disclosure program requiring businesses who operate in California to report their scope emissions annually. This program seeks to improve transparency and accountability in corporate climate practices by requiring standardized, verified emissions data from companies making over $1 billion in revenue. Scope 1 and 2 emission reports are expected to be due August 2026 and Scope 3 reports in 2027.

BEGIN COMPLIANCE NOW

WHAT COMPANIES ARE REQUIRED TO REPORT FOR SB 253?

Covered Entities

Both public and private business entities who have total annual revenues over $1 billion USD (in the prior fiscal year) that do business in California. The revenue threshold accounts for revenue earned for the entire entity, not just the revenue earned in California.

Doing Business in California

CARB follows the Revenue and Tax Code § 23101 which defines “doing business” as actively engaging in any transaction for the purpose of financial or pecuniary gain or profit. An entity is doing business in California if the entity is doing business (as defined) and any of the following conditions are met:

  • The entity is organized or commercially domiciled in this state
  • Sales in California exceed the inflation adjusted threshold of $735,019 (2024)
Revenue Threshold

The bill defines revenue under the California Revenue and Taxation Cost (RTC) § 25120(f)(2) definition. Revenue is the gross amounts realized on the sale or exchange of property, performance of services, or the use of property in a transaction that produces business income.

WHAT INFORMATION IS REPORTED UNDER SB 253?

California SB 253 requires covered entities to report Scope 1, 2, and 3 GHG emissions to the California Air Resources Board (CARB). The reporting business must cover the entity’s emissions globally, not just those emitted within California.

Companies must prepare reports in accordance with the GHG Protocol Corporate Accounting and Reporting Standard (or a successor standard). Scope 3 reports should follow the GHG Protocol Corporate Value Chain (Scope 3) Accounting and Reporting Standard.

WHAT ARE SCOPE EMISSIONS?

Scope emissions are categorized by the following definitions:

Scope 1 Emissions: Direct emissions from sources the company owns or controls.

  • Company vehicles
  • On-site combustion

Scope 2 Emissions: Indirect emissions from purchased energy.

  • Electricity
  • Heating and cooling
  • Steam

Scope 3 Emissions: Indirect emissions resulting from business activities, not included in Scope 2.

  • Business travel
  • Purchased goods
  • Emissions from production of raw materials
  • Waste

WHEN ARE SB 253 EMISSIONS REPORTS DUE?

Companies are required to report their GHG emissions on an annual basis. CARB has proposed Scope 1 and 2 reports to be due August 10, 2026*. Scope 3 reports are expected to be due in 2027, though an expected date has not been set.

  • If the reporting entity’s fiscal year ends between January 1 and February 1, 2026, the entity will report data from the fiscal year ending in 2026.
  • If the reporting entity’s fiscal year ends between February 2 and December 31, 2026, the entity will report data from the fiscal year ending in 2025.
  • Each entity will have at least 6 months after their fiscal year ends to submit their report.

Entities that were not collecting data at the time the Enforcement Notice (Dec 2024) was issued, the entity will not need to submit a report in 2026. These entities must send CARB a letterhead stating they were not collecting data at the time.

*These due dates are pending finalization by CARB.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires covered entities to hire a third-party expert who will independently review and verify the company’s GHG emission data disclosure.

Under SB 253, assurance is not required for 2026 reports. Limited assurance will be required in the future. By 2030, CARB will require data assurance at the “reasonable assurance” level for Scope 1 and 2, and at a “limited assurance” level for Scope 3. These requirements are implemented at CARB’s discretion, depending on market conditions.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH SB 253?

SB 253 violations will result in administrative penalties of up to $500,000 per reporting year. CARB will not assess penalties for companies who demonstrate a good-faith effort for Scope 3 emissions reports until 2030.

HOW DO I COMPLY WITH SB 253?

CONTACT US HERE to learn more and get started with compliance.

SB 253 compliance can be confusing and hard to navigate. Bringing on a consultant like Green Econome simplifies the entire process while ensuring accurate reporting. Our certified Carbon Auditing Professionals streamline the complex reporting requirements of climate disclosures, from end-to-end carbon accounting to preparing assurance-ready GHG emissions reports.

WHEN SHOULD I START SB 253 COMPLIANCE?

SB 253 deadlines are rapidly approaching. Retrieving historical GHG emissions data will take time, especially when coordinating with your team.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. Green Econome takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

GREEN ECONOME PROCESS

With every phase of the process, Green Econome’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

The City of Orlando Building Energy and Water Efficiency Strategy (BEWES) is a citywide energy benchmarking & audit program requiring owners of existing buildings to report energy use annually, using ENERGY STAR® Portfolio Manager®. Effective as of December 2016, this program provides building owners insight into their building’s energy efficiency and helps meet the City of Orlando’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER ORLANDO BEWES?

Covered Properties
  • Any commercial or multifamily building over 50,000 Sq. Ft.
  • Any municipal building over 10,000 Sq. Ft.
Exemptions
  • More than three meters are associated with the property and the electric utility does not provide whole-building data aggregation services. Or if the owner doesn’t have access to master meters or any other means. 
  • It meets any of the exemptions defined for a covered city property. 
  • The director determines that, due to special circumstances unique to the facility and not based on a condition caused by actions of the applicant, strict compliance with provisions of this ordinance would cause undue hardship.   
  • The property qualifies as having a financial hardship.  
  • The property is considered “industry,” “manufacturing-intensive services,” or is part of a theme park. (Warehouses used for light manufacturing, storage, and/or distribution of goods are not exempt.) 
  • Substantially all of the non-city property is used for telecommunications infrastructure.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building energy and building use data. For example, in 2025, building owners must report 12 months of 2024 data.

WHEN ARE ORLANDO BEWES BENCHMARKING REPORTS DUE?

May 1, annually. Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

As of December 2020 Orlando BEWES requires buildings with an ENERGY STAR score below 50 (or equivalent energy use intensity) to perform an energy audit or retro-commissioning of their base building systems once every 5 years. Privately owned buildings must conduct an ASHRAE Level 1 audit.

An energy audit is a detailed assessment of how a specific building can improve its performance through a review of base building systems and equipment that use energy. This includes lighting and hot water systems, HVAC units, devices that contribute to plug load and the building envelope.

Alternatively, the building owner can elect to conduct retro-commissioning which identifies inefficiencies and performs low-cost or no-cost upgrades to improve building performance.

WHEN ARE ORLANDO BEWES AUDITS DUE?

Audit Due Date

Beginning in 2020, audits or retro-commissioning are required for low-performing buildings by May 1, 2025 at the latest and every 5 years thereafter.

WHAT IS THIRD-PARTY DATA VERIFICATION?

Third-party data verification requires owners/managers of covered buildings to hire a third-party expert who will independently review and verify the building’s benchmarking data.

Under Orlando BEWES, data verification is not required.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH ORLANDO BEWES?

Buildings that fail to comply with Orlando BEWES will be publicly disclosed as non-compliant in the city’s annual report.

HOW DO I COMPLY WITH ORLANDO BEWES?

CONTACT US HERE to learn more and get started with compliance.

Orlando Building Energy and Water Efficiency Strategy (BEWES) compliance can be confusing and hard to navigate. Bringing on a consultant like Green Econome streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START ORLANDO BEWES COMPLIANCE?

Ordinances such as Orlando BEWES are already in effect across the country, and deadlines are rapidly approaching. Retrieving historical building data will take time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows resulting in fines and enforcement penalties. Green Econome takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

ORLANDO BEWES RESOURCES

Climate Policy

Orlando 2018 Community Action Plan

Bill Text

Orlando Ordinance 2016-64

Ordinance Homepage

Orlando BEWES

GREEN ECONOME PROCESS

With every phase of the process, Green Econome’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES

[Update as of 10/2025: The Trump Administration’s One Big Beautiful Bill (OBBB) has updated the 179D sunset to June 30, 2026. Any projects that begin construction after that date will no longer be eligible for a tax deduction under Section 179D.]

Who knew when I started Green Econome in 2009 that my previous 30 years in accounting and finance would help building owners understand the opportunities provided by tax benefits in the Inflation Reduction Act (IRA), signed into law by President Biden in late 2022?

This significant package is heavily focused on how commercial real estate owners can invest in their properties to reduce operating costs and emissions by taking advantage of tax deductions and credits. Providing cash flow to owners, some of these benefits can be transferred to others, and non-profits can receive cash tax payments to help pay for these projects.

Let’s break down one of my favorites: Section 179D

This is a tax deduction. For those still learning about financing, a tax deduction is a reduction to the property’s income before tax liabilities are calculated. So, any of these deductions should be considered against the owner’s tax rate.

Section 179D has been around for many years and there is an opportunity to take the original deduction for 2020, 2021, and 2022. The new version, I call “IRA Section 179D” is effective with projects going into service after 1/1/2023.

When I started to research this deduction to help our clients increase their cash flow for these projects, it wasn’t clear that there were two specific periods to be considered for this deduction. The initial period is effective from 1/1/2023 – 12/31/2026. Beginning 1/1/2027, we have a new version (which is not as beneficial).

2025 Update: President Trump’s One Big Beautiful Bill has impacted many clean energy tax incentives – 179D being one of them. To remain eligible, projects must begin construction by June 30, 2026. Any projects whose construction begins after that date won’t be able to receive a tax deduction.

How is 179D calculated for your new construction or large retrofit project?

It all starts with an energy model. What is this? Well, it is a virtual design of your building. For the initial period, the energy model is a design of the property with the mechanical standards established by ASHRAE 90.1 2007. Note 2007! If you have a building that you are retrofitting in California to Title 24 2022, you are already way more efficient. LEED certification requires buildings to meet ASHRAE 90.1 2010 standards, so again, 2007 is much less efficient.

Next, the energy model is designed to the current material and efficiency standards the building is being built to or retrofit. The driver for this deduction is the “efficiency gain,” which is the difference between the energy used at the ASHRAE 901. 2007 standard vs. the current building code standard. For those projects requiring prevailing rates, the deduction is 5 times higher, which means it can be very significant.

The calculation is the sq. footage of the property multiplied by the corresponding rate based on the efficiency gain. This value is then multiplied by the owner’s tax rate… and there you have it: the anticipated tax deduction! The larger the property, the higher the deduction, but I believe smaller buildings may benefit based on the level of improvements planned.

Efficiency projects built together, pay together

When claiming the 179D tax deduction, it is most beneficial to have completed all the projects together in the same year. Going a step further, there is a tax “sweet spot”, where a project can receive the prevailing wage rates adjusted for inflation when a construction or retrofit project started before 1/1/2023, was worked on continuously, and completed after 1/1/2023. We are seeing $5.66 x the square footage on these projects, which makes them very valuable!

Green Econome is a woman-owned, full-service energy and water efficiency project construction and consulting company with over 20 years of combined experience. We can help explain these complex tax benefits and match you with a 179D specialist. Furthermore, we can recommend solutions that will increase the NOI of your property and increase market value. Get the ball rolling and reach out to Green Econome’s founder and CEO, Marika Erdely.

DOWNLOAD SECTION 179D INFO SHEET

RELEVANT SERVICES

The City of Honolulu Better Buildings Benchmarking (Ordinance 22-17) is a citywide energy and water benchmarking disclosure program requiring owners of existing buildings 25,000 Sq. Ft. and above to report energy and water use annually, using ENERGY STAR® Portfolio Manager®. Effective as of July 2022, this program provides building owners with insight into their building’s energy efficiency and helps meet the City of Honolulu’s Climate Action Plan goals.

BEGIN COMPLIANCE NOW

WHAT BUILDINGS ARE COVERED UNDER HONOLULU BENCHMARKING?

Property Size

Commercial and multifamily buildings over 25,000 Sq. Ft.

WHAT INFORMATION IS REQUIRED FOR BENCHMARKING?

Annual benchmarking reporting requires 12 calendar months of whole-building electric, gas, water, and building use data. For example, in 2025, building owners must report 12 months of 2024 data.

WHEN ARE HONOLULU BENCHMARKING REPORTS DUE?

June 30, annually. The 2025 benchmarking deadline was extended to September 30.

Benchmarking reports must be submitted on an annual basis using the previous year’s data via ENERGY STAR® Portfolio Manager®. This is the EPA’s benchmarking tool that is used for compliance reporting in most ordinances across the country.

WHAT INFORMATION IS REQUIRED FOR BPS?

Building Performance Standards (BPS) are often considered Phase II of these building energy use ordinances. After reporting your benchmarking data, many ordinances require you to make changes to the building’s operations or equipment to lower energy use over time.

Honolulu does not have a BPS program at this time.

WHAT ARE THE PENALTIES IF YOU DON'T COMPLY WITH HONOLULU BENCHMARKING?

Failure to comply with Honolulu’s Better Building Benchmarking program (Ordinance 22-17) or reporting false or incomplete data will result in a written notice of violation. Failure to correct the violation within 60 days of the notice will result in a $1,000 fine. The building owner will also be fined $100 per day thereafter until the violation has been resolved.

HOW DO I COMPLY WITH HONOLULU BENCHMARKING?

CONTACT US HERE to learn more and get started with compliance.

Honolulu Better Buildings Benchmarking compliance can be confusing and hard to navigate. Bringing on a consultant like Green Econome streamlines the entire process while ensuring accurate reporting. We also offer free consultations with our benchmarking clients to review the reports and identify inefficiencies to improve.

WHEN SHOULD I START HONOLULU BENCHMARKING COMPLIANCE?

Ordinances such as Honolulu Better Buildings Benchmarking are already in effect across the country. Accurate benchmarking can take between 3-6 months to complete. Collecting utility data, conducting tenant outreach, and retrieving historical building data (if needed) takes time, especially when coordinating with property managers and utilities.

Waiting until the last minute risks missing compliance windows, resulting in fines and enforcement penalties. Green Econome takes every measure to ensure complete and accurate data collection. The sooner you reach out, the sooner you will reach compliance.

GREEN ECONOME PROCESS

With every phase of the process, Green Econome’s experienced and knowledgeable team is here to guide you on the results, options, and path forward to meet your compliance goals.

RELEVANT SERVICES